Spyder Auto Installation: 2006-08 Dodge Ram 1500 CCFL LED Halo Projector Headlights

This video offers a walk-through for installing a set of Spyder CCFL Halo or LED Halo projector headlights in 2006-08 Dodge Ram 1500 models.

This video walks you through the wiring process for both types of headlights for comprehensive instruction.



  1. Bajram Isaku on April 21, 2020 at 4:24 pm

    i purchased these headlights. turn signal on the far right side has a plug but no plug on the truck for it nor in the kit for it.

    and hid’s will not fit into the projector without modification of the headlight.

  2. Spyder Auto on April 21, 2020 at 4:25 pm

    please go to our website and look up PRO-YD-DR06 and we have a back image of the light, The back side of the light where the red and black wire are going to is for the high beam adjustment.

  3. robert King on April 21, 2020 at 4:25 pm

    Does anyone have the stock head lamps forsale. im looking for someone who has done the spyder upgrade and wants to sell their left over stock lights.

  4. XzLeviathanzX on April 21, 2020 at 4:26 pm

    Does anyone have any idea how the hell you connect that little orange light next to the LEDs near the bottom of the head lights ? I want that thing to work too!

  5. April Fabela on April 21, 2020 at 4:26 pm

    How the heck did you get it so flush?! I bought these exact headlights and there is at least 1/4 inch gap if not more.

  6. djsinnay on April 21, 2020 at 4:26 pm

    Hey i have a 2013 ram and i wanna get some lights will the 2012 headlights fit the 2013 ram 1500??

  7. Paul Hopkins on April 21, 2020 at 4:27 pm

    It costs a lot of money to make your truck look cheap.

  8. moises azzam on April 21, 2020 at 4:27 pm


  9. Ray Sanchez on April 21, 2020 at 4:28 pm

    The lefty in the video, turns the splices the wrong way. The splices should always be turned to the right.

  10. Brian Lefler on April 21, 2020 at 4:28 pm

    mine has three bulb holes. no instructions for the small hole. my original bulb doesnt fit in the new light. 2006 Ram 1500 SLT

  11. Derek Post on April 21, 2020 at 4:29 pm

    I’m thinking about buying these headlights for my pickup. The taillights are easy to install but these look very complicated to install. I don’t know anything about wires or any of that stuff

  12. Ken Martens on April 21, 2020 at 4:32 pm

    yeah I figured it out. also I found a cheap no name bulb that seams brighter than the ones that came with it. time will tell just how long they last though.

  13. moises azzam on April 21, 2020 at 4:34 pm


  14. Spyder Auto on April 21, 2020 at 4:34 pm

    yes, If you wanted to run your LED/HALO/CCFL you will wire them to you parking lights.

  15. Spyder Auto on April 21, 2020 at 4:36 pm

    yes, the bulbs are replaceable.
    high beam – h1
    low beam – h1
    led – replaceable t-10/194/168 miniature wedge
    signal/parking – 3157

  16. Spyder Auto on April 21, 2020 at 4:41 pm

    great question. there are only two options for halos – LED or CCFL. if it just says halo it is probably a LED-lit halo. LED lit halos are dimmer than CCFLs and are visible mostly at night as an accent light. CCFL stands for cold cathode fluorescent lighting. this is a very bright, crisp white light because the halos are actually small fluorescent light tubes. These are more expensive than LED but are easily visible during the day. I hope this clarifies it for you

  17. Noel SHIELDS on April 21, 2020 at 4:42 pm

    Fucking A man I appreciate it some videos they was to ready to show how they look and skip the wiring blessings be with you

  18. Ben Holmes on April 21, 2020 at 4:42 pm

    Where can i get the right plug for the little amber turn signal next to the leds on the bottom? I looked on the socket and it says CS182F E1.

  19. Sergio Navarro Mty on April 21, 2020 at 4:43 pm

    Hi why in a ram 2006 i can not pull it out??. I tried i Took the two screws on the front and the one down the fender 10mm but At the time Inwant to take it out it Seems a screw At the left top side on the back of the headlights need to be taken out but your video does not shows how . So there are two screws
    On the front two on the back one down the fender and one that does not shows the video on the top of the bottom back 10mm screw.can you help me ???

  20. The Adventure Bros on April 21, 2020 at 4:43 pm

    OMG NEVER POKE A WIRE TO TEST. way to go Spyder you are instructing people to damage every wire by putting holes in them. CHRIST

  21. William Stuart on April 21, 2020 at 4:44 pm

    Think twice about buying these three not bright at all

  22. saul563 on April 21, 2020 at 4:48 pm

    Where can you purchase replaceable bulbs and how much are they?

  23. Ruger260Taurus on April 21, 2020 at 4:48 pm

    Can u make it to were the low and high beams come on when u turn the high beams on. It would make them brighter wouldn’t it? And would u hav to run it all the way from the light switch in ur cab?

  24. Spyder Auto on April 21, 2020 at 4:51 pm

    yes we offer headlights for 2009-13 Ram Truck Ram 1500 models and our headlights should fit as long as your Ram is not equipped with the factory (OEM) HID system

  25. Spyder Auto on April 21, 2020 at 4:51 pm

    Sir please note that these light are halogen and not HID so relay harness and "canceling resistors" is not need. those part will only be need if you added and HID kit and you have either a bulb out or lights flickering.

  26. xjpostman on April 21, 2020 at 4:58 pm

    How do you adjust these lights? I bought a truck with them in and my high beams are where my lows should be.
    I’ve searched it and all I can find are guys saying "the adjustment screws SHOULD BE on the housing behind the light," but I can’t funds anything that moves my beams.
    A video on this would be very useful.

  27. Logan Goodwin on April 21, 2020 at 4:59 pm

    does anyone know how to adjust both lights without taking the whole set up out?

  28. Spyder Auto on April 21, 2020 at 5:01 pm

    hey there, great question.

    You’ll use the headlight adjuster bolts on the backside of the headlight, as you can see them in the link I have attached to the video description. It’s easiest to adjust them in a darkened setting with your headlights pointed at a wall about 20 feet away to adjust your headlights up and down and left to right.

  29. Spyder Auto on April 21, 2020 at 5:01 pm

    yes, the bulbs are replaceable.

    LOW BEAM – H1

    HIGH BEAM – H1

    LED – T-10/168/194 MINIATURE LED

    TURN SIGNAL – 3157

  30. Dev Everything on April 21, 2020 at 5:02 pm

    Holy crap, its head lights not an alarm with remote start!

  31. Haseeb Ferozan on April 21, 2020 at 5:02 pm

    question. I bought 2003 Toyota camry halo headlights and the rings are led. I want to open the housing and replace the rings with ccfl. is that possible? and if so, what is the measurement of the rings? This will help me greatly! please reply! or email me at haseebinator3@gmail.com. thank you for your kind help.

  32. Fellopian22 on April 21, 2020 at 5:03 pm

    Can you replace the bulb for the headlights if they burn out?

  33. PowderBrad12 on April 21, 2020 at 5:04 pm

    THEy didnt mention relay harness or cancellign resistors.

    Kinda a lame video, considering if you do it this way on a Ram it WILL NOT WORK!

  34. djsinnay on April 21, 2020 at 5:05 pm

    Whats the difference between Led/ccfl/halo and which is better??

  35. FCB 10 on April 21, 2020 at 5:08 pm

    Okay so how would i wire these if i want my turn signal to turn on with the park lights along with leds and halos would i wire them the same way as in the video?

  36. Niko Valdez on April 21, 2020 at 5:10 pm

    I have a 09 ram 2500 will these work?

  37. Spyder Auto on April 21, 2020 at 5:10 pm

    The socket the far right of the light that does not connect to the truck is for certain model. The Ram has 2 style of headlight from 06-08. there is one style that had a amber strip on the bottom of the light and one without the amber strip. If your vehicle does not have that socket you can leave it alone or tap the wire. The HID problem you will have to contact the company you order these lights from because SPYDER does not sell or have HID kit.

  38. weston m on April 21, 2020 at 5:11 pm

    When u spliced into the parking light did u leave the wire connected to the original light bulb?

  39. ZarrenHD on April 21, 2020 at 5:11 pm

    My wires that i must connect are Red and Black, instead of Black and White?

  40. Spyder Auto on April 21, 2020 at 5:13 pm

    no, that is not easily doable

  41. Ken Martens on April 21, 2020 at 5:14 pm

    How do you replace highbeam and lowbeam bulbs?

  42. Aaron Fonseca on April 21, 2020 at 5:18 pm

    is this the install steps if I have the CCFL halo lights (Spider) for my 2007 Chevy Silverado 1500

  43. Lud Wig on April 21, 2020 at 5:18 pm

    Those wires are awfully small, what 22 gauge?, Thanks for showing these spyder light video, I think I will avoid the brand!  It is these tiny cheap ass wires used on the truck that are causing all kinds of problems, Computer, Alter, charging, shifting, even allowing the engines to stay running. On a truck mind you. A few bumps on the road, and that’s it.

  44. Mark Richter on April 21, 2020 at 5:19 pm

    These are a hazard, the adjustment is so minimal that even adjusted to the max they shine about 3 feet higher than the hood of the pickup at 15 feet let alone 25. I can only use the high beams on the road as the low beams are so far off, they don’t even offer lighting for the lines on the road. Adjustment of the low beams is complete removal of the assembly. Sold my OEM set too soon and then had to go buy another set to replace these. Willing to make someone a great deal on these but not responsible for you or the deaths you cause by driving blind at night.

  45. Brett S on April 21, 2020 at 5:19 pm

    Why is the turn signal not on the side?

Leave a Comment