Install of LED Ceiling Mount Light

Install of LED Ceiling Mount Light

Removed old fixture and installed a new LED ceiling mount light.
1.First, find and turn off the breaker that supplies power to the light.
2.Verify the new fixture has all its parts before taking the old down.
3.Remove the old fixture, make a note of how the wires were connected to it before you disconnect them. This will help you connect the new fixture correctly, and worst case, allow you to put the old fixture back in service if needed, maybe new one didn’t have all the parts(step 2) or something like that.
4. Temporarily connect frame to junction box and mark locations in ceiling where anchors need to go. Then remove frame and install the anchors on your marks.
5. Attach frame loosely to junction box, get screws that attach frame to anchors started. Slowly tighten everything up until frame is secured to i-box and ceiling.
6. Reconnect wires and carefully tuck them into the j-box. Then carefully push fixture into frame and give it a slight turn and it will lock into place.
7. Turn on the breaker, flip the switch and check out your new fixture.

Thanks for watching and don’t forget to subscribe to keep up with the latest videos.

Leave a Comment

You must be logged in to post a comment.